Ethernet over VDSL2 Converter

  

Connects over two Ethernet LANs over VDSL2 technology

  

Features

Datasheet

Application Diagram

Manual

Specifications

Enlarge Picture

Ordering

 

UVE7312-MS

   


 



 

Overview

 

UE7312-MS, VDSL2 (Very-High-Bit-Rate Digital Subscriber Line 2, ITU-T G.993.2 Standard) converter, is an access standard technology that allow carriers to deliver data up to 100Mbps more bandwidth in both upstream and downstream paths over the existing copper plant. The Ethernet over VDSL2 Converter featured signal conversion technology between standard Ethernet (10Base-T and 100Base-TX) and innovative VDSL2 over Ethernet on the telephone line. It is an ideal solution to extend the distance of local area network from 100 meters to 1,500 meters. The VDSL2 Extender allows voice and data to be transmitted on the same line, saving a lot of redundant cost of wiring.

 

For network system integrators, this product is the best choice for planning centralized Internet access for hotels, offices, apartments and campus environment. In addition, it will allow operators to compete with cable and satellite providers by offering service such as high definition TV (HDTV), Video-on-demand, video-conferencing, high speed internet access and advanced voice service like VoIP, over a standard copper telephone cable. The VDSL2 technology is a cost effective solution to be used as last mile line into the home or office while the ISP and Telcos use Fiber optic lines as the backbone.

 

The converter is plug and play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel for providing the operating status of the system.


 

Features

  • Compliant with VDSL2 ITU-T G.993.2

  • Complies with IEEE802.3u 100Base-TX standard

  • Complies with IEEE802.3 10Base-T standard

  • Supports 1 x RJ-11 port for Ethernet over DSL2

  • Supports 1 x RJ-11 port for telephone connection

  • Supports 2 x RJ-45 ports for 10/100Mbps Ethernet

  • Voice and Data work on the same telephone line

  • EoVDSL2 port supports maximum throughput up to 50Mbps/100Mbps (upstream/downstream) over 1000ft (300 meter) distance

  • Long Reach maximum throughput is around 17Mbps downstream over 5000ft (1500 meter) distance

  • Provides a piano DIP switch for Master / Slave (CO/CPE) mode selection

  • Plug-&-Play without any software configuration

  • Transparent to all kind of network protocols

  • Provides rich diagnostic LED indicators

  • Desktop design with convenient magnet Mounting

      

 TOP

Application Diagram

VoIP Gateway Router with FXS+FXO Ports Application Diagram

A pair of VDSL2 master and slave converters is the best solution for Ethernet clients within a building network. With existing telephone line infrastructure, various broadband services can be easily deployed without new cabling.


 

Specifications

System Specifications

Standards

IEEE802.3   10BASE-T

IEEE802.3u 100BASE-TX

Ethernet over VDSL2

VDSL2 ITU-T G.993.2

Network Data Rate

Ethernet: 10/100Mbps

VDSL2: Up to 100Mbps

Mode Control

Master Mode: Acts as Master (CO)

Slave  Mode: Acts as Slave (CPE)

VDSL2 Speed

Downstream: 100Mbps over 1000ft (300m)

Upstream: 50Mbps over 1000ft (300m)

LAN Interface

Two RJ-45 connector 10/100M Fast Ethernet ports

VDSL2 Interface

One RJ-11 connector for VDSL2

One RJ-11 connector for telephone

Cable Connection

RJ-45 (10Base-T): UTP CAT. 3,4,5 (2-pair wire)

RJ-45 (100Base-TX): UTP CAT. 5 (2-pair wire)

VDSL2: Telephone line AWG26 (0.4-mm diameter, 1-pair wire)

Cable Length

Ethernet: Maximum 100 meters (UTP LAN cable)

VDSL2: Maximum 1,500 meters (5000ft)

 

Hardware Specifications

LED indicators

Power x1, VDSL x 1, LAN x 2

Master Mode x1

Slave Mode x 1

Dimension

122 (L) x 75 (W) x 26 (H) mm

Operating Temperature

0 ~ 40  (32 ~ 104)

Operating Humidity

10% ~ 90% non-condensing

Power Supply

5VDC, 1A, External Power Adapter

Certification

FCC Class A, CE Class A

 

VDSL2 Converter Front / Rear Panel Indicator

 

Magnet  Mount

 

 

 

Package Contents

  • One Ethernet over VDSL2 Converter

  • One User's Manual

  • One Telephone Cable

  • One 5V, 1A External AC Power Adapter

 

 TOP

Ordering Information

Model

Description

UVE7312-MS

Ethernet over VDSL2 converter with Master/Slave (CO/CPE) mode selection Switch

 

 

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.

Copyright EUSSO Technologies, Inc. 2008