|
Overview
UPE5600-HST is a high power PoE Splitter for use in Power over Ethernet (PoE) systems.
With Ethernet Input (data + power) port and Output (data only) port, UPE5600HST may split
power from existing LAN cable and convert up to 12VDC/2A for power hungry applications such
as Wireless Access Points (AP), Security Cameras and IP Phones. The internal current limit,
short-circuit and overload protection are implemented to provide up to 12VDC/2A for use of DC
output power. By using UPE5600-HST, both data and electrical power can be delivered to a non-PoE
Ethernet enabled devices from a single Cat.5 Ethernet cable.
UPE5600-HST can also work in pair with UPE5600-HIT (High Power PoE Injector) to deliver up to
12VDC/2A for use of high power devices such as 18W Security IP Cameras. UPE5600-HST itself is
powered by UPE5600-HIT and so requires no separate power connection in the middle of the cable,
making it extremely easy to connect and power IP cameras. UPE5600-HST terminal units complement
any PoE injector unit or midspan switch to provide small to medium business setting a complete
end-to-end PoE solution.
The advantage of PoE function is to provide power and data over existing network cables. It
eliminates the need for electricians or extension cords while installing new expanding equipments.
Therefore, UPE5600-RT can save space, reduce cables and eliminate the requirement for the dedicated
electrical outlets to lower the installation cost. This PoE technology is suitable for small business,
school campus, bookstore, coffee shop with internet hot spot, or enterprise network environments.
|
Features
-
12VDC 2 ~2.5A 30W High Power PoE Splitter
-
IEEE802.af Power over Ethernet (PoE) standard
-
Complies with IEEE802.3u 100Base-TX standard
-
Complies with IEEE802.3 10Base-T standard
-
1 x RJ-45 PoE In port for both data + power
-
1 x RJ-45 Ethernet Out port for data only
-
1 x DC Output power jack for 12VDC (default) and
-
9, 6, 5, or 3.3VDC (optional)
-
Delivers data and power for non-PoE Ethernet-enabled devices
such as Wireless AP, IP Camera or IP Phone
-
Supports NWay protocol for speed (10/100Mbps) and duplex mode
(Half/Full) detection
-
Supports auto MDI-X function for switch-to-station
switch-to-switch connection with non crossover cable
-
Easy-to-read LEDs provide instant operating feedback
-
Desktop size and wall mountable design
-
Plug-&-Play without any software configuration
-
Transparent to all kind of network protocols
-
No power is required
TOP
|
Application
Diagram
1-Port 30W High Power PoE Splitter Application Diagram |
|
UPE5600-HST is a high power PoE Splitter that delivers both data and
electrical power to a non-PoE Ethernet-enabled devices
that be able to installed in the area where traditional power cabling
and outlets are unavailable or difficult to install.
|
RJ-45 Connector & Pinout |
|
|
Specifications
System
Specifications |
Ethernet Standard |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3x Full
duplex operation and flow control
IEEE802.3af Power over
Ethernet |
Interface |
1 x RJ-45 Ethernet-IN
Port (Data only)
1 x RJ-45 PoE-Out Port
(Data and Power)
1 x DC Input Power Jack (
2.1 x 5.5 x 9 mm ) |
Power |
12VDC high power (default) or 9, 6, 5, 3.3VDC (optional) |
Uplink |
Auto MDI/MDI-X ( Auto Crossover ) |
Network Speed |
10/100Mbps Full/Half
duplex mode auto detection |
Diagnostic LED |
Power |
Cable Connection
|
10Mbps:UTP/STP
Catalog 3 or Better, Max. 100 Meters
100Mbps:UTP/STP
Catalog 5 or Better, Max. 100 Meters |
Filtering / Forwarding Rate |
10Mbps:14,880pps/14,880pps
100Mbps:148,800pps/148,800pps |
Installation |
Desktop Size and Wall
Mountable ( Included Wall Mounting Screws) |
Operating Temperature |
0 ~ 50C |
Operation Humidity |
5% ~ 95% (non-condensing) |
Dimension |
120 (L) x 90 (W) x 28 (H)
mm |
Weight |
330g (Net) |
Power Supply |
No Power Adapter is required, Power is
supplied from High Power Injector |
Emission Certification |
CE、FCC
Rule Part 15、RoHS |
Package Contents
TOP
|
Ordering
Information
Model
|
Description
|
UPE5600-HST |
1-Port 30W Mid-Span High Power PoE Splitter, Output :12VDC, 2A |
UPE5600-HSTO |
1-Port 30W Mid-Span High Power PoE Splitter, Output :12VDC, 2A Outdoor IP66) |
|
|
|
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production, marketing
and service support, we deliver the full range networking products
including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches,
Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well
as Internet Telephony Gateway, Print Servers, Broadband Router and
many others.
Copyright
EUSSO Technologies, Inc. 2010
|
|