Overview
The
Single Fiber Converter is designed with an optic Wavelength Division
Multiplexing (WDM) technology that transports bi-directional full
duplex signals over a single fiber simultaneously. This is a great
help to the network planner simply double backbone capacity or to
save the installation cost of expensive fiber cables.
UCT6131
is a Fast
Ethernet 10/100Base-TX to 100base-FX WDM (Wavelength Division
Multiplexing) Single Fiber Converter supports two types of media for
network connection such as 10/100Base-TX unshielded twisted pair and
100Base-FX Fiber optics.
This
converter can be used as a standalone unit or as a slide in module
to EUSSO Fiber Converter Chassis (up to 10 units per chassis) for
use at a central wiring closet.
|
Specifications
Hardware
Specifications
|
Standards |
IEEE802.3u
100Base-TX/100Base-FX
IEEE802.3
10Base-T
|
Wavelength |
1310nm
Model: Transmit (TX) 1310nm, Receive (RX) 1550nm
1550nm Model: Transmit (TX) 1550nm, Receive (RX) 1310nm |
Fiber Port
|
SC Single Fiber port x 1
|
TP Port |
RJ-45 UTP/STP port x 1 |
UTP Cable |
CAT
5 cable for 10/100Mbps
and
up
to 100-meter |
Single Fiber Cable |
Recommended:
9/125μm
single mode
Optional:
8.3/125,
8.7/125, or 10/125μm
single mode |
LED
Indicators |
FX LNK/ACT (Green) |
Light
when fiber connection is good
Blink when fiber data is present |
FX 100 (Green) |
Light for fiber 100Mbps operation |
FX FDX/COL (Amber) |
Light
when full-duplex mode is active
Off when half-duplex mode is active
Blinking when collision is present |
TP LNK/ACT (Green) |
Light
when twisted pair connection is good
Blink when twisted pair data is receiving |
TP 100 (Green) |
Light
when twisted pair speed is 100Mbps
Off when twisted pair speed is 10Mbps |
PWR (Green) |
Light when 5V power is applied |
Data Transfer Rate |
100Mbps:
148,800 pps
10Mbps: 14,880 pps |
Flow Control |
IEEE802.3x
for full duplex
Back pressure flow control for half duplex |
MAC address Table |
1K entries self-learning |
Buffer Memory |
128K byte |
Slide Switch |
DTE / MPR switch x 1 (DTE pin-outs is already
crossover on board) |
Power Requirement |
1A @ 5VDC from AC-DC Adapter (Full load
consumption 700mA maximum) |
Dimension |
26.2
(H)
x 70.3
(W) x 94
(D)
mm |
EMC Complaint |
FCC Part 15 Class A and CE Mark |
Environment |
Operating
Temperature: 0 ~ 50C
Storage Temperature: -25 ~ 70C
Humidity:
5%
~ 90% non-condensing |
TOP
|
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production, marketing
and service support, we deliver the full range networking products
including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches,
Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well
as Internet Telephony Gateway, Print Servers, Broadband Router and
many others.
Copyright
EUSSO Technologies, Inc. 2003
|