Q02:
How to know the UIS1700-FN is working?
Please
reset it to factory default.
Then reconnect PC by typing c:>IPCONFIG /renew
If you didn't get the IP as 192.168.1.xxx
That means this Router DHCP server function is not working.
Then
the last step, setup your PC with manually IP address, for example:
IP: 192.168.1.111
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
Then
browse or ping the router.
If
you still cannot connect to it. Send it for RMA repair.
Of course, you need to make sure other network device, your PC, LAN
cable, Link LED light properly.
|
Q01:
How to reset UIS1700-FN?
Please
push the factory reset button for more than 5 seconds until the LED
flash for POST again.
Then
reconnect PC by typing c:>IPCONFIG /renew
If
you get the IP as 192.168.1.xxx
That
means this Router DHCP server function is working, then you may
browse http://192.168.1.1
again to set it.
top
|
EUSSO
Technologies, Inc. is a dedicated data communication and networking
company. With professional experiences in design, production,
marketing and service support, we deliver the full range networking
products including Gigabit Ethernet, Fiber Optic, Wireless LAN,
Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers.
As well as Internet Telephony Gateway, Print Servers, Broadband Router
and many others.
Copyright
EUSSO Technologies, Inc. 2003
|