faq_uis1400-S9

UIS1400-S9

Q12:The Router’s “System Status Page” shows Printer is ready, but I can not print?
Q11:How to make Windows XP and Windows 2000 printing from UIS1400-S9?
Q10:I use Linux system, how to make it printing from UIS1400-S9?
Q09:I use Apple Macintosh Powerbook G4 running Tiger 10.4.x, how to make it printing from UIS1400-S9?
Q08:I think Dynamic Routing is not necessary for Dynamic VPN setup. Isn't it?
Q07:Is the "Dynamic VPN" setup related to "DynDNS" setup for WAN port connection?
Q06:To setup VPN between 2 routers, can both sides of UIS1400-S9 be used with Dynamic VPN?
Q05: How can I get technical support for this router?
Q04: What is the latest version firmware of the UIS1400-S9?
Q03: Can UIS1400-S9 USB port to be used for USB WAN Modem?
Q02: What is the default IP address of the UIS1400-S9?
Q01: How to reset the UIS1400-S9 to factory default setting?

Q12:The Router’s “System Status Page” shows Printer is ready, but I can not print?

Please check what is the operating system you used, and install the proper printer driver and set it.

Please note the following settings:
1. Bidirectional printing must be disabled.
2. Printer IP address is equal to the Router LAN IP address.
3. Protocol must be selected LPR.
4. LPR setting Queue name is "lp" not "Ip"
5. LPR byte counting must be selected.

top

Q11:How to make Windows XP and Windows 2000 printing from UIS1400-S9?

Please read this file “UIS1400-S9_WinXP-2000 Printer-setting.pdf” for detail

Q10:I use Linux system, how to make it printing from UIS1400-S9?

Please read this file “UIS1400-S9_Linux Printer-setting.txt” for detail.

Q09:I use Apple Macintosh Powerbook G4 running Tiger 10.4.x, how to make it printing from
UIS1400-S9?

Please read this file “UIS1400-S9_MAC Printer-setting.txt” for detail.

top

Q08:I think Dynamic Routing is not necessary for Dynamic VPN setup. Isn't it?

No, when using VPN you don't need to setup the routing table. You just need to ping the remote
gateway's FQDN you setup to see if it replies the correct WAN IP address of the VPN router.

Q07:Is the "Dynamic VPN" setup related to "DynDNS" setup for WAN port connection?

When using dynamic VPN it does not relate to DDNS, because you don't need to care about who
the remote VPN client is. In the other word, it doesn't check the remote gateway IP or Domain
Name but check the Pre-shared key, IKE and IPsec proposals only.

Q06:To setup VPN between 2 routers, can both sides of UIS1400-S9 be used with Dynamic VPN?

No, you must use one side as static WAN IP. When building VPN tunnel, you must trigger from static
VPN router's LAN. Because the dynamic site doesn't configure the remote side's information so it doesn't understand whom he want to establish VPN tunnel. It (dynamic DNS router) often used as VPN server.

Q05: How can I get technical support for this router?

Please mail to support@eusso.com if any technical support required.
And provide the following information:
1. Model Number:
2. Serial Number:
3. Country:
4. Problem description:
5. Firmware version:
Also please provide http://Router_IP/sysinfo to us.

top

Q04: What is the latest version firmware of the UIS1400-S9?

Until this document released, the firmware of UIS1400-S9 is version R1.94m3v

If you need more latest version firmware, please download from EUSSO Web site: http://www.eusso.com/DownloadPage/Download_Firmware.htm

Q03: Can UIS1400-S9 USB port to be used for USB WAN Modem?

No, UIS1400-S9 USB port is only provided for USB printer sharing function, not supporting USB WAN Modem.
In the Router_CD, maybe you could find:
QIG_Router.pdf
QIG_USBRouter.pdf
UM_Router.pdf
UM_USBRouter.pdf
Please use non-USB file for your proper reference.
USB WAN Modem is another model which is not covered in UIS1400-S9.

top

Q02: What is the default IP address of the UIS1400-S9?

The router’s default IP address is 192.168.123.254.

Q01: How to reset the UIS1400-S9 to factory default setting?

There are 3 methods to reset UIS1400-S9 to its factory default setting:

1.From the web browser interface:
From administrator’s main menu, choose Toolbox and select “Reset to default”.

2.Restore with RESET button:
First, turn off the router and press the RESET button in. And then, power on the router and hold the RESET button down until the M1 and or M2 LED start flashing, then move away the hand. If LED flashes about 8 times, the RESTORE process is completed. However, if LED flashes 2 times, repeat.

3.Restore directly when the router power on:
First, hold the RESET button about 5 seconds (M1 will start flashing about 5 times), move away the hand. The RESTORE process is completed.

top

EUSSO Technologies, Inc. is a dedicated data communication and networking company. With professional experiences in design, production, marketing and service support, we deliver the full range networking products including Gigabit Ethernet, Fiber Optic, Wireless LAN, Switches, Hubs, LAN cards, PCMCIA adapters, Converter, Transceivers. As well as Internet Telephony Gateway, Print Servers, Broadband Router and many others.