Q01:
How
to install UKS8202 USB KVM Switch for Windows 98 PC?
(2005/7/25)
Before
installation, please make sure all of peripherals and computers have
been turned off.
Windows
98/98SE user:
When you apply Windows 98/98SE to USB KVM Switch, please use the
following set up procedures:
1st
Step:
1.Connecting
USB type A cable to PC.
2.Connecting HDDB15 pin Male cable to PC.
3.VGA monitor's cable is connected to console VGA port
4.Connecting PS/2 keyboard to PC PS/2 keyboard port directly. Please
do not connect
PS/2 mouse to your PC.
5.Boot up the PC and PC is unable to get the mouse during boot up
system. The
Window
O.S. will show the following message or similar to the following:
" Windows did not detect a mouse
attached to the computer. You can safely attach a
serial mouse now. To attach a mouse to a PS/2 mouse
port, you must first turn the
computer off.
□ Do not show this message in the future. "
Please
use keyboard "Tab" key, "Space" bar and
"Enter" key to select the item
" □
Do not show this message in the future." and finishing booting
Windows O.S..
6. It will mount USB HID (Human Interface Device) driver. Using Keyboard
Tab key, Left
Arrow key, Right Arrow key and Enter key to accomplish
set up process.
7.To switch to the next PC port of USB KVM switch
8.Repeat
item 5 and 6 procedure to all of PCs.
9.Please use Windows key to shut down computers.
2nd
Step:
1.Connect
PS2 keyboard and PS2 mouse to Mini USB KVM Switch's console port.
2.Turn
on all of PCs
top
|